How Much Does It Cost To Replace An Ipad Screen – 5 Easy Ways (Updated Guide for 2022)

In this guide, we will show you everything you need to know about how much does it cost to replace an ipad screen, so keep reading!

Below you can find out 5 different methods much does it cost to replace an ipad screen,

Method 1 – Ipad 7Th Gen Screen Replacement! (10.2 Inch Ipad) Tutorial

Ive on the seventh gen ipad for quite some time now but my younger brothers used it most one of. Them ended up cracking it and i know a lot of you have experienced something similar so in todays video. Ill be showing you an alternative option to taking it to apple or a third party to get the screen. Replaced coming up so i bought the screen replacement on amazon for $65.99 there actually doesnt seem to be very.

Many sellers selling this and prices range pretty drastically on top of that there arent many reviews on any of. These so just make sure when youre looking for one ill leave the one that i got in the description. If its not available just do your research and try to find the best one you can so hopefully this. Video provides an in-depth and easy-to-follow process to make sure that works well and saves you a lot of money. I say its definitely worth the savings if you can do it yourself because apple charges 249 for their repair.

Im sure you can find it a little bit cheaper at third parties but with this screen only being $65. Youll save maybe 200 bucks in fact there have been times that apple has sold this ipad for cheaper than. The screen replacement cost lets go and get into the replacement alright so getting into it the first thing youre. Gonna want to do is power this device down as you can see this screen is pretty cracked so hopefully. At the end of this process itll be looking brand new and once the device is all the way powered.

Down the next step in the process would be to heat up the edges of the screen and thats gonna. Help us remove the screen that being said youre supposed to be doing that with a heat gun and i. Know that a lot of you are doing this on your own dont have a heat gun so what well. Do is try to use a blow dryer and then go from there and really quickly so the tools actually. Came with the screen replacement as well as a basically like a pair of tweezers so were gonna try to.

Be doing everything with just everything that came in the package so well move that away for now and start. Heating up this display that should be enough i can kind of feel i saw this screen maybe lifting a. Little bit so were gonna go ahead and get these tools right here well open them up okay and the. First thing im going to try to use is this suction suction cup right here also keep in mind the. Connection area is located right down this side so be cautious when youre dealing with with this area all right.

So it seems like the edge is still pretty secure some of you may not have a screen to where. I can lift up from here so im going to try not to utilize lifting it from there look like. It started separating a little bit no there it is all right and should be getting in here soon so. Basically just continue working your way around the screen till you have an area to where you could slide something. Underneath so lets continue okay were gonna go ahead and just slide this in there to hold our place now.

As you can see the problem with my screen is that its very cracked here along the edges so its. Going to be difficult to get this off cleanly kara now im going to go ahead and use a little. Bit more heat hopefully try to pry some word of that glue out okay so now we have pretty solid. Chunk being lifted all right lets go ahead and once again follow around the edges to try to loosen stuff. Up lift this up hmm making progress alright lets go ahead and continue down this line on the side all.

Right all right so basically after a lot of effort we finally got this screen off here we also need. To uncover some screws that are up there so we need to go and get the rest of that off. So im gonna flip this back over shake the glass off my fingers so here we are after repeatedly going. Back with the blow dryer to prying a little bit more we finally got it to where the top up. Here is clean the bottom is as well and then this screen lifts up entirely so the next step would.

Be to unscrew this lcd okay so what we want to do we want to hold the screen up because. Of the connection thats right there we dont want to over bend so were just going to put this box. Right here just to kind of give it a little bit of support and then from there what we need. To do we have four screws that we need to undo they are just phillips head the screwdriver came i. Mean the kit came with a couple different heads i believe this will be the one so lets go ahead.

And unscrew all four of these and make sure youre putting pressure down as you push you dont want to. Strip any of these screws so apply a lot of pressure in that in that first bit okay theres one. Number two is underneath here so what we need to expose it all right so theres number two were gonna. Organize these in the order that they come out so if in the bottom left corner im gonna put that. There the bottom right and put that there and then these two i want to put right there in there.

Just so we can remember when we put them back in because some of these screws might be different make. Sure to continue to apply pressure while unscrewing okay and then last ones right here i have a piece of. Tape underneath here to kind of keep this from moving but its kind of offsetting this ipad but pressure and. Twist so really quickly i made a mistake of pulling out this screw so the other the fourth one that. We need to do is underneath here and that also needs to be exposed okay lets go ahead and expose.

This fourth one all right so all four screws are undone now we should be able to slide something underneath. This lcd to pry it up right this side up go back over here a card or something longer and. Thinner would work a lot better here but all right there.this so now that kind of popped up we go. To left lift this up just straight that way im just gonna blow off some of the glass what you. Want to go ahead and do first is these connect the battery so to do that thats right here were.

Gonna unscrew this little screw right here okay pull that out just remember this for the battery after removing that. Screw we want to go ahead and stick something under here to disconnect the battery im gonna use something a. Little thinner this this library card to hopefully try to stick it under there yeah okay that should be enough. It should be disconnected but in order to find out well go ahead and pull this screen down and attempt. To turn on you just okay and as you can see it is not turning on so well put that.

Back up now we need to leave that in place the next step would be this cover right here that. Is philips head as well you have three screws there so go ahead and do all of those all right. Now we have this plate that comes off well go ahead and set that aside next to those screws all. Right so now that this is now that the metal cover is removed we can go ahead and disconnect the. Lcd just by pulling up on that and the lcd is disconnected we go ahead and set this aside now.

We can go and remove the home button connector so here we have this foam piece that would need to. Be removed okay and then now that that is removed we can just set that aside for now so as. You can see i remove this little sticker i guess for protection over the home button connector basically how this. Works is that from here this lifts up and then you should be able to slide this out and then. From there when you reassemble it you slide this back underneath and you should be able to shut it down.

So you want to firstly pry that up pull that out and then you should be good to go and. Then we can go ahead and remove these two that connect the digitizer you need to choose your fingernail or. Whatever you prefer and now that thats them should be all fully disassembled next step would be to disconnect the. Home bone from the screen and put it on to the new screen which i havent pulled out yet but. Lets go ahead and disconnect that from here so this just pulls up like this okay should be able to.

Kind of just follow it along alright put that underneath here and continue you want to make sure that youre. Not putting too much tension on on these wires but as you can see the glass was so messed up. That it kind of came with the assembly so thanks lets continue to remove what we can off of this. Now we have the home button completely disconnected i adjusted the lighting so hopefully we can kind of see things. A little bit better but now that this home button assembly is disconnected were going to need to place it.

Onto the new screen so were all done with this screen we can go ahead and get rid of it. And ill pull the new screen assembly on now now if your screen looked anything like mine youre probably gonna. Have shards of glass it would be ideal to get a handle vacuum and vacuum that up and youre probably. Also gonna have a fair bit of glass on the inside of the ipad case so i would go ahead. And kind of vacuum that up a little bit as well all right perfect so we have most of the.

Glass taken care of itll probably still be a couple bits and pieces here and there but thatll get cleaned. Up later so here we have the new digitizer of that so looks pretty nice and it has the two. Connectors that are needed well well go ahead and do is place this home button assembly onto this and the. Reason why i slid it under this is because i want to make sure that im not touching the back. Of this screen before final assembly so now its still protected so before we put everything back together youre gonna.

Want to clean out the edging of this metal case and the reason for that is because this comes pre. Glued and when you peel this blue thing off and you slide everything back together you want to make sure. That everythings gonna be flush and you dont want anything pushing up on the display so lets go ahead and. Clean the edges of this with a razor blade what i would probably do is warm it warm it back. Up with the hairdryer so lets do that also this is easier if you have some goo gone you can.

Go ahead and just get a paper towel fold it up a couple times make it to where you have. A nice edge just like so and then what i would do i would spray just a little bit onto. This edge and then go around wiping it on and then going back with the razor blade and clearing it. Off so that should make it easier make sure not to get goo gone in any other place other than. The outside area alright so after removing all the glue you would then go around with an alcohol wipe and.

Then make sure that its kind of clean all throughout so lets go and get this assembled also on a. Side note some of you may have damaged the casing which you can see i have here i would probably. Try to extend that out somehow or just lightly tap it with the back of this and try to make. It smooth again that way the screen should fit nicely so im gonna go and try to do that now. So all i did to fix that was take this hit it a few times with the back of the.

Knife and it kind of moved a bit and i think it should be good now also so a quick. Tip i get some roll tape put it on the bottom like that and that usually helps the ipad pretty. Much stay in place so lets go and get this connected i just removed the cover that was over here. Just so i can kind of see whats going on so basically like i said you lift this up now. That thats exposed youre able to just slide this it should just slide it right underneath now that thats in.

There we can go and shut this connect the other two now the digitizer is fully connected this phone part. This goes kind of right over there were going to leave it out here for now lets go ahead and. Set this set that up and connect the lcd the lcd is now connected now we can go ahead and. Reconnect the battery lets see what happens if we try to power down all right that is a good sign. All right lets check it off lets see all right and there you go you can actually see that the.

Digitizer is working lets go home lets go and put the brightness down so you can kind of see what. Im doing over here so here you can actually see that it is working and responding really well its actually. Really neat how this works super cool to see though now that we know everything is working lift the screen. Back up put everything back together and then continue from there get this back on another quick tip to magnetize. Your screwdriver theres some magnets over here rub them on there and you should be able to pick up the.

Small screws perfect so now that thats connected lets go ahead and get the battery screw back in so lets. Lay this back down and drop it into place all right so now its time to put these screws back. In now we need to clean off this lcd i would once again use an alcohol wipe for that so. Once you have the screen as clean as you can get it ideally try not to get as many fingerprints. On it as i did you can use some windex or alcohol to clean it best now that thats them.

We can go in and peel off all of these blue pieces to expose the glue and finally once all. Of those are peeled well go ahead and double-check the screen make sure theres nothing on it and well just. Peel this protector off of here once thats off lets go ahead and put this all back push and press. Into place lets go ahead and see if this thing actually works all right its powering on peel this off. Just put the brightness up there we go nice a little bit lower and it looks to be working just.

Fine and there you have it let me know in the comments if you were able to do it successfully. And if not let me know what issues youre having and ill try to help thanks for watching you enjoyed. The video make sure to drop a like down below and of course if you enjoy tech and like saving. Money make sure to subscribe ill see you in a bit.

Method 2 – How To Replace & Fix A Broken Ipad Screen

Note – This section will be updated soon.

Method 3 – Ipad Mini Screen Replacement Cost | The Reality Of Apple Service

Hey guys so as you might be aware recently i broke my ipad screen it is fully functional but the. Front panel or the glass is broken i want you guys to just give it a guess and tell me. How much it would cost to fix this thing ill give you options so dont worry 5 to 10k 10. To 15k 15 to 20k or none of the above you may be surprised but the answer is none of.

The above because it costs a whopping 29 000 rupees funny thing is i bought this for about just 31k. So basically they are offering me about 2000 rupees as a value or worth for this thing right now if. I sell it outside i might easily get around 70 10 000 rupees so it all sounds ridiculous right so. Let me explain why it is like this basically apple does not have a repair program when a screen is. Broken so all they do is just replace it so if you are subscribed to apple care plus then it.

May cost a nominal 4 000 rupees or so if you dont then you are screwed i mean they quoted. Me 29 000 rupees in one of the authorized apple service center i mean this also depends on the model. And the purchase date and you can see here i have the ipad mini 5 which is over one year. Old if apple cannot offer such repair services they can at least outsource this to some third party repairers so. That a customer can confidently go ahead and get it repaired they generally dont seem to be that flexible with.

This idea either so the only way out is to find some local solution or a repairer so i did. Shop around and they quoted me anything around three to six thousand in different places but they said they need. To replace both the touch and display as it comes as a complete set but there are a lot of. Concerns like how is the quality durability and trust i believe this is also the same case with the iphones. I mean a lot of people buy iphones and it is not very uncommon to break the phone screen so.

I think apple needs to really go a long way in terms of improving hardware services and support and it. Seems apple is currently least bothered about it at least here in india so i hope this kind of improves. And uh make sure you dont break the screen or youre pretty much screwed anyway so i hope you found. This video informative if you did please like this video also subscribe thanks for watching ill see.

Method 4 – Ipad Pro 11 Inch Glass Replacement Cost

Note – This section will be updated soon.

Method 5 – Ipad Air 2 Screen Repair Cost Will Break Your Heart

So i come to you guys with someone of a heavy heart because i had to get somebody bad news. Today when i deliver the news they looked at me like i just ground up their hopes and dreams like. Hed grind up garlic to make garlic powder and then dumped it into a you know a toilet which had. Been used consecutively by ten food poisoned truck drivers at a 401 rest stop and then i flushed it into.

The filthy subsidiary of the nearest great lake and you know the news was that the ipad air 2 you. Cannot replace just the glass normally its a hundred dollars to fix and i bet everyone maybe sometimes i even. Do them 490 when we have a sale but the ipad r2 you have to replace the lcd that is. Working perfectly fine in this thing i dont want to show you the screen saver in case in case the. Customers watching you know broken heart at all also kind of psycho thing they might pull off on me but.

I digress you gotta change everything so to change everything the price is 250 dollars two hundred and fifty dollars. To fix your tablet heck you can buy you can buy up i mean theres a plethora of tablets that. Are $250 or less out there that you can buy but if you want your ipad air 2 fixed youre. Gonna pay more than it would be to buy another tablet thats not apple or even an older apple but. You know suffice it to say some people do want their stuff fixed and thats were here to fix their.

Stuff now theres a silver lining for me now for the customer and its only that i can if the. Lcd is working and i can take the lcd the whole assembly off without breaking the lcd i can sell. The lcd to a wholesaler will then give me like 40 bucks which is peanuts considering my cost on the. Screen is 225 dollars and im charging 250 and this person whittled me down to 240 after about 20 minutes. Of my time which is very limited and probably 20 minutes of their time which is not so limited if.

Theyre willing to fight over $10 for 20 minutes but having said that thats still you know for $60 profit. Or so the only reason i offer this repair is because you cant call yourself a tablet and cell phone. Repair store specializing in apple products if you dont fix every apple product even if i was losing money on. This how itd still fix it anyway thats my video for today detection all right so thanks for watching.

Conclusion – How Much Does It Cost To Replace An Ipad Screen

The purpose of this post is to assist people who wish to learn more about the following – ipad 8th 10.2 inch touch repair – how to replace screen glass, ipad air 1st a1475 screen replacement, ipad 6th a1893 a1954 screen replacement – step by step, ipad 2 screen replacement, ipad air 4 2020 lcd screen replacement, ipad 6th gen screen replacement., ipad mini 1 2 3 screen replacement, fast and easy, low cost repair!, ⚙️🛠️🍏ipad air 2 – screen replacement (a1566 and a1567), how to repair super crack touch digitizer screen on ipad 5th gen (year 2017) – step by step guide, how to replace apple ipad 7 7th gen digitizer cracked glass screen. ipad restoration., why apple repairs are so expensive, does toothpaste really fix cracked screens?, ipad pro 11 inch screen replacement step by step, ipad 7th gen 10.2″ 2019 screen replacement. a2197 a2198 a2200, ipad air 3 screen replacement.

Thank you for visiting and reading this article! If you found this article useful, feel free to share it with your friends and help spread knowledge.