How Much Is It To Replace An Iphone 11 Screen – 5 Easy Ways (Updated Guide for 2022)

In this guide, we will show you everything you need to know about how much is it to replace an iphone 11 screen, so keep reading!

Below you can find out 5 different methods much is it to replace an iphone 11 screen,

Method 1 – Iphone 11 Screen Replacement: Fix Your Cracked Screen!

Note – This section will be updated soon.

Method 2 – Iphone 11 Screen Replacement

Hi welcome and i hope youre doing well this here i have an iphone 11 as you can see that. The front has a cracked screen on it so im going to do a step by step on how to. Replace an iphone 11 crack screen so lets go ahead and remove the two screws from the bottom and of. Course im not able to turn off the phone at this moment because the touchscreen is not working so ill.

Be disconnecting the battery all right so once you have the two screws removed you can go ahead and get. A prying tool and slowly go all around the phone what youre trying to do is youre trying to cut. Through the double-sided adhesive tape that would be a water-resistant tape so once you replace the once you have the. The screen replacement uh your phone will not be any water resistance okay so lets go ahead and separate them. So at this point the phone actually turned to your right okay do not turn all the way because the.

Cables are still intact so this is the y screws and the bracket is holding on it go ahead and. Remove all the screws this is the bracket you can put them on the side okay at this point here. I need to disconnect the battery the phone is still running and its still working it is actually playing is. Actually playing netflix so thats how you can tell the phone is still working but i need to quickly disable. The battery so lets get to the battery part here okay so and this is the battery cable you can.

Get a plastic prying tool and separate that cable right there okay so at this point can continue with the. Uh the repair so this one here is connected to this cable and there you have it okay now this. Is the new screen so what ill be doing is ill be transferring this everything over to the new screen. And that should be it all right so lets get going with that okay so thats how you remove it. Now come back to the new screen go ahead and set it in it should fit according to the bracket.

And it can easily go in okay once you have it in the place go ahead and press it down. Okay and finish up with the screw the last screw on the top left corner is actually a y screw. The rest of these three screws they are phillips screws now once you have the screen in place im gonna. Set the cable back on theyre just like a lego once you have in the right position you can just. Press it down and it will snap right back in okay i have to in place let me go ahead.

And connect the battery back on first since the phone is off then you still can continue with the the. Screen by installing this okay so once you have that the next thing ill be doing is to put the. Bracket to close and secure the battery okay the final steps is to have this two cable for a new. Lcd screen to go back on it and finally the last bracket here okay at this point what you want. To do is you want to try to match the top part that little bracket that holds onto it so.

You close from the top press it down and then you can slowly work your way around the side okay. And it snapped right back on in place so before i put the two screws at the bottom i just. Want to test and make sure the screen works so let me put it on the side a little bit. I might have customers pictures on it or something like that so try not to show it here on the. Video it is still booting up all right so it works uh let me try to bring up yeah so.

As you can see uh things are working okay and everything looks good yeah so all right so thats the. Process on how to do it and the final step would be putting the truth two screws back on here. Okay so let me see make sure the phone is going on yep everything looks good the display looks good. Um yeah so i hope you enjoyed the video and hopefully this video helps you step by step on how. To replace your iphone 11 uh if you have any question you can comment below until next time i look.

Forward to make another video thank you bye.

Method 3 – Iphone 11 Screen Repair

All right guys today were going to be fixing an iphone 11 that as you can tell is pretty pretty. Damaged um this has a lot of screen issues nobody can use a phone so were going to be replacing. This screen anybody can do this repair its not hard at all its super easy as long as you have. The right tools and most importantly if you take your time and go slow the first thing you want to.

Do is make sure you buy the right screen and you want to check your connections so i know the. Connections are on this right side of this iphone 11 so i know when im taking off the lcd i. Need to go slowly heres a few of the tools youre going to need the first one is going to. Be this pentalobe screwdriver i will leave a link in the description to all these tools a tri-wing screwdriver i. Just call it a y screwdriver i need some anti-static tweezers dont use regular tweezers a nice sesamo or some.

Kind of pry tool and a small phillips screwdriver like i said ill leave a link in the description to. All the tools the first thing you want to do just like with every single iphone before this is you. Want to remove the two pentalobe screws at the bottom you do have to have this special screwdriver it comes. In a lot of kits but you do have to have it to open those screws at the bottom and. Then you want to go around the sides this video has been sped up so take your time slow it.

Down you dont want to rush anything just remember those cables are on the kind of more to the bottom. Right side of this phone so when youre prying make sure you dont pry too deep but if you do. Its not going to be too big of an issue because youre replacing the lcd anyways but just on that. Right hand side just go a little bit slower when youre prying up but i usually start at the bottom. But if you have any kind of gaps uh starting the gap and and pull out some of them are.

A little bit harder than others some are easy but when you do finally get it where you can kind. Of maneuver it and get in there and youve gone all the way around and get all that adhesive out. Of the way youre going to want to pry this open like a book basically from left to right and. Once you pry it open dont go past 90 degrees that cable at the far left its important and you. Might break it you want to start by removing the five screws on this shield right here and you use.

The tri-wing screwdriver theres going to be five of them and make sure when you lay them out you lay. Them out just the way that you took them out itll make it a lot easier when youre putting them. Back so you see those two cables right there ones an lcd cable and ones a digitizer cable you want. To go ahead and connect disconnect those cables and i always like to disconnect the battery i try to do. It if we can right off the bat but with this iphone 11 you have to disconnect the two cables.

On top and then use your tri-wing screwdriver and remove these three screws that are on this l-shaped bracket and. These are all tri-wing screws as well and like i said when youre laying them laying them out just try. To lay them out exactly the way that you took it out and lay these brackets right next to them. So to make it super easy when were putting this back together so were going to disconnect the battery and. I usually like to do this first but on this iphone 11 you cant access it first and then now.

We want to disconnect your front camera mic cable and once you do that i mean the screen is off. These newer iphones in my opinion are a lot easier to remove than the old ones this top part right. Here youre going to want to take your phillips screwdriver theres three phillips screws on this right hand side and. Once again theyre different size screws so make sure that when you lay them out youre laying them out correctly. Or when you put them back you could cause damage theres one little tiny screw at the top its a.

Tri-wing screwdriver they like to mix different screws to make it harder to take apart but its really not so. You want to fold that cable down and i kind of got in here a little too close with my. Camera but um theres a little piece at the top that you want to basically pry loose and when you. Pry it loose im trying to see where you can see how thick it is at the top you want. To make sure you get behind that and not cut and cut it in half or anything so you want.

To pry on that and theres a little um adapter at the top and im going to show you that. Adapter in slow motion here in just a second its kind of like a little shield so right there at. The top you see a little gold plate its right there its basically just like a little shield that helps. Hold it down i had to get that off to remove it and i didnt show that in the video. Prior so just make sure you lift up that little shield right there and it should just come right off.

And once that comes off the other parts a lot easier to get out but im basically doing everything in. Reverse order now so im pushing this little plate back into its spot um once ive you know put the. Front camera and mic back in and i just want to make sure that it fits flush but i was. Trying to slow that down just to show you what that bracket looks like because i missed it in the. Other part so the brackets in im just making sure everything fits down flush solid and then right now im.

Trying to line up the screw holes and make sure that nothing looks like its too far apart from each. Other or like a screw when you screw it in its not going to fit or anything and everything right. Here looks pretty good so were just going in reverse order were gonna put um our take our phillips screwdriver. And put our three screws back in once we put our uh three screws back in were going to grab. Our y screwdriver our tri-wing screwdriver and were going to screw that little bitty screw in at the very top.

And if you need to you can um slow this video down it sped up a little bit just to. Kind of so you get to the point of it but take your time pause the video dont rush um. Its the only time i ever see anybody mess up is when you rush its its not a hard repair. At all um so were gonna take these cables and were gonna were going to put them back in the. Exact same spot we pulled them out from so you want to connect the battery you want to connect these.

Two cables and i always like to connect the battery last so i went under these cables and did it. But i uh connected all the cables and we basically just want to test this phone out before we start. Putting down the plates and the screws and all that to make sure that the phone functions the way that. It should um and i had to uh pull out those two cables and then put the battery down to. Make this work so it just adds up i want to put the battery connector first and then the lcd.

And digitizer were gonna go ahead and power this iphone on and sometimes you get the passcode sometimes you dont. So if you dont have the passcode you can swipe up on the phone and click emergency and then just. Type one two three four five six seven eight nine pound zero you wanna make sure that everything you touch. The right thing comes up on the screen and if it does then everything is connected and it should be. Fine you can do a phone call test if you want to because you mess with that front cam uh.

Mic at the top um so you can always have them call you or you can call them make sure. They can hear you and you can hear them thats just an extra step but ive had no problems with. These newer iphones um having any kind of issues um the cameras at a bad angle so i apologize i. Was focused on getting this done in a timely manner youre going to take that l-shape bracket that you put. And youre going to want to put the three tri-ring screws back but before you do that you want to.

Make sure that that battery connector is is connected and its down once you do that youre going to connect. Your lcd and your digitizer those are the two cables on the top and then youre going to want to. Grab your shield over here in a minute thats right there on the right side and you want to going. To grab that shield and lay it on top and if you just line it up with the screw holes. Theres five screw holes and if youve laid out your screws correctly you can just put those back the way.

That theyre laid out and it makes it super simple like i said this repair is not hard whatsoever anybody. Can do it you just got to make sure you take your time and your patience and your patience sorry. But i did speed up this video on bits and pieces just to to get through it but its maybe. Takes about 30 45 minutes at the most and thats if you are taking your time and doing it correctly. When youre putting this in at the end you want to make sure you push on the bottom of the.

Screen towards the top of the phone that helps it sit in just right and the last thing you need. To do is just put in your last two pentalobe screws and thats it this iphone 11 is done you. Can turn it on and once again go through your test do the emergency test check your numbers all that. You can make a phone call if you want to but other than that i mean all you did was. Replace the screen uh so hopefully this this helped you out like i said anybody can do it uh if.

This helped you in any way please uh let me know thank you.

Method 4 – Start To Finish – Iphone 11 Screen Replacement

Hi welcome and i hope youre doing well this video here ill be doing an iphone 11 screen replacement as. You can see not only just the cracked screen but i also have the bed lcd um display so well. Be changing out the iphone screen that includes with the lcd uh together so lets get started the first thing. I need to have is you know make sure you protect your eye so i have this eye protective goggle.

Im going to put it on and these are the tools that ill find it useful or you really need. Them to get this repair done all right so as you can see im not able to do anything on. The phone i cant see where the power button to shut it off but i guess its more or less. Around here so but were going to disconnect the battery to get to it alright so lets get started uh. Just wanted to show you iphone 11 has two camera the iphone 11 pro would have the third camera somewhere.

Around here so this is definitely an iphone 11. Okay so lets go ahead and take out the two screws. At the bottom here just so you know if you replace the iphone screen with the third party screen on. It you will no longer have the water resistant and also you would have you would not have like the. True tone color okay so when you replace with a third-party screen the iphone um would recognize this is not.

An original screen uh there would be a pop-up message that says um hey you know this is not a. Im not sure what the message says but its something like hey this is not um original screen and and. You dont you probably lose i think the true tone color but besides that everything else is fine by using. A third-party screen so its not such a bad its not such a bad thing you know if you want. To change it to a third-party screen you know rather than having a cracked screen or or broken lcd i.

Rather use a third-party ones but anyways your preference okay so um again so im having a prying tool uh. There will be adhesive tape all around the iphone uh it may be quite difficult for you to get in. But once you get in im using this prying tool to cut the adhesive tape to kind of break away. From the base so that we can open up the the iphone okay just like that and of course youll. Be cutting the water resistant that adhesive tape all around the iphone okay as you can see uh this is.

It and theres a bracket thats holding the lcd screen we need to remove this one here is actually a. White screw so go ahead and there are five of them go ahead and remove it okay and just the. Bracket would come right out and before i go ahead and disconnect this i need to remove this bracket here. There are three screws that is holding it and thats where the battery is so i want to make sure. I disconnect the battery first before i get to the screen so youre just gonna be careful with it and.

There you go remove the bracket and heres the prying tool the plastic prying tool and this is your battery. Okay so go ahead and disconnect the battery and as you can see the screen is disconnected right so theres. No display on the screen so the battery is disconnected and now i can come back here and remove these. Two cables all right and this cable here is actually connected to this so go ahead and remove that as. Well and there you go you have the entire screen separated so the next thing ill be doing is to.

Transfer uh this onto the new screen so heres my new screen so the new screen comes as this like. This okay and what you need to do is just transfer all this onto here and this one is actually. A phillips screw go ahead and remove the screws so theres three screws that holds on that and theres one. Y screw that holding on the top so four screws total and this entire piece will just come right out. Okay i will try to save this and then transfer this this piece right here onto the new screen okay.

So lets go ahead and stick it in like so so up okay so this one here ill be stick. In between and then youll close it right there you just have to stick in between this this um this. Metal here so it goes underneath in between that all right so that should be it lets come back here. Lets go ahead and connect this thing back together so the flex cable is just like a lego so once. You have them in the right position when you press it you would go snap back in uh thats pretty.

Much it but try not to force it so you want to find out that sweet spot that you know. When they align properly once you have them in place and you can just press on it it would snap. Back in so like this one im having some difficulties so let me go ahead and start with this first. Okay and then ill work on to the next one here all right so theyre in place oops its kind. Of a bit difficult because the battery cable is right behind that so youre to make sure one finger is.

Holding onto the cable and then find the battery and go back in all right so i have it in. Place now make sure that you have the bracket you need to put the bracket back on work with this. First just be patient take your time you do not want to rush the process because you youll be holding. The screen the same time youre trying to make sure that this tiny screw that goes onto it in a. Proper position so theres a lot of holding and trying to make sure you have them aligned in place all.

Right so i have that aligned in place just perfect and ill be going right at the back here screw. It in and this is one final screw for this bracket which is hidden underneath here okay so theyre in. Place which is good and do not forget this big bracket so the bracket go back on top with five. Screws okay so align them in place while youre holding the screen have the screw go back in so again. The screen is not original screen so when you replace you would get a error message a pop-up message saying.

That the screen is not original blah blah blah and you do not have the true tone color which is. Not a big deal um you still can operate the phone and use it use it as this but some. People theyre just really picky about it and they want the phone to be everything original so you may have. To go back to apple or replace a new phone okay so lets go ahead and turn on the phone. First all right thats a good sign i can see apples here on the new screen uh before i put.

It back make sure on the top this is where you want to align the top cover first okay make. Sure theyre in place aligning properly and then slowly press it down on the side so okay so as you. Can see the phone is just fine everything is in place you just press it down on a corner okay. I just want to test all the numbers make sure it works all right so everything is good um do. Not forget there are two screws at the bottom here so this this is it and um i hope that.

This video helps give you some kind of an idea on how to replace your own iphone 11 screen if. You want want to know where you can find the the tools that you need also with you can find. The screen ill have them in the description below you feel free to click on those link you would give. Me a kickback as being a referral fee ill get like a small commission coming from either amazon or ebay. So if you have any questions please comment below and i hope to make you more videos in the near.

Coming future thank you and have a good day.

Method 5 – How To Replace Iphone 11 Glass Screen Assembly | Screen Replacement

Hey there whats up everyone in this video im going to show you how to take apart and replace the. Screen assembly on your iphone 11 hey there my names sergio with search tech and in this channel i do. Tech reviews and tutorials so if you havent subscribed already go ahead and do so now hit the bell to. Receive notifications on my future videos theres gonna be links to all the information that i talked about in this.

Video down below in the description all right lets get right to the video now alright so in order to. Open up your iphone 11 first thing were gonna do is were gonna remove the two pentalobe screws at the. Bottom so another thing we are gonna have this tool set link down below in the description where you can. Get all of the premium tools to repair your iphone 11 or 11 pro so were gonna be using the. Pencil of screwdriver and removing the two screws at the bottom put them somewhere organized so that you dont lose.

Them once you have the two screws removed lets go ahead and power the phone off if you havent done. So already and then what were gonna need to do is were gonna need to give it heat here around. The screen assembly around the corners here because it does have a small amount of adhesive around the edges here. Holding the screen down to the frame so you can either give it some heat with a hairdryer or heat. Gun by just moving it around the edges here to loosen up the adhesive or you can go ahead and.

Set it flat on a hot plate which is what i prefer to use so let me go ahead and. Show you this is the hot plate here i set it to about a hundred degrees celsius and then just. Place the iphone flat on it for a few minutes until its hot enough to where you touch it and. It burns just a little bit so you may want to use some rubber gloves so that once you grab. The phone now since it is gonna be a little bit hot so that you dont burn your hands so.

Once the phone is hot enough go ahead and grab it and were gonna go ahead and use this suction. Cup place it towards the bottom here of the screen and were gonna lift up on it until we see. A slight opening once you see that slight opening were gonna insert this prying tool in between the plastic frame. Here of the screen and the metal frame bezel so as you can see theres a slight opening there i. Was able to wedge it in there and then were gonna kind of just gently go around it removing the.

Adhesive thats holding the screen to the housing of the phone were gonna use this second prying tool to help. Us out this is a plastic leg tool which is a lot safer so were gonna just go around the. Entire housing here the screen assembly of the iphone and then once you have most of the screen lifted up. Like this you can remove the suction cup so the iphone 11 screen is gonna have the flex cables over. Here on this side just like the previous iphone 10 and 10 s so what were gonna do is were.

Gonna just wiggle the screen to remove the adhesive here at the top and were gonna lift it sideways to. This side and the iphone will open up completely so now the next step is were gonna have to remove. These tri-tip screws here so that we can go ahead and disconnect the flex cables connecting the screen to the. Motherboard so were gonna be using this tri-tip screwdriver which comes with the set to remove the tri-tip screw and. Then once the tri-tip screws are removed you can go ahead and pry up on the metal bracket all right.

So then were gonna go ahead and disconnect these two flex cables right here which connect the screen and then. Were gonna go ahead and disconnect this last cable down here which connects to the ear speaker here on the. Screen so there we have your iphone 11 lcd screen taken up lets go ahead and remove these three tri-tip. Screws so that we can disconnect the battery and remove any electricity that might be flowing through the phone so. Lets go ahead and disconnect this little cable right here which is the battery flex cable and there we go.

So we make sure that the phone is completely off and the battery is not connected so the next step. To replacing your screen assembly is were going to need to remove these screws here holding on the ear speaker. Assembly so its gonna have one small tri tip screw up here at the top and then its gonna have. Three small phillips head screws and then were going to go ahead and get under the flex cable here and. Pry up on it gently so that we can remove the small microphone up here and the face id and.

The proximity sensor and there you go gently pry it up and it will come out in one piece so. This is the ear speaker assembly for your iphone 11 were gonna place that to the side and then with. The tri-tip screwdriver were gonna remove a couple of screws that are holding down this metal bracket so its gonna. Have nine screws in total that were gonna need to remove so once all of the tri-tip screws are removed. Were gonna go ahead and move the flex cables hair out of the way so these are two are going.

To be stuck and were gonna need to gently pry under this flex cable because it is held down with. Some adhesive so were gonna need to get under it and gently lift it up to remove the adhesive holding. It down and there you go once you remove the adhesive completely should be able to pull the cable outwards. And then pull this one out and then youll be able to lift up on the metal bracket and there. You go the middle bracket will come right out so once youre ready youre gonna get your new screen which.

Wont look like this new iphone 11 the screen its gonna be linked down below as well so youre just. Gonna get your screen and then were gonna put everything back together in reverse order so let me show you. How to do that now so first were gonna go ahead and put the metal bracket on the screen so. This is gonna go through here and then this cable were gonna flip it over here to this side were. Gonna make sure that these two metal prongs down here wedge under the plastic frame here of the screen and.

Then just position all of these slots here correctly where the screws will have to be put back in place. Okay then we can go ahead and stick this legs cable back down and there you go a.

Conclusion – How Much Is It To Replace An Iphone 11 Screen

The purpose of this post is to assist people who wish to learn more about the following – 🔧iphone 11 glass replacement – restoration guide 4k 🖥, iphone 11 display replacement, iphone 11 pro screen replacement, start to finish iphone 11 screen replacement, iphone 11 pro max screen replacement, how to replace iphone 11 cracked screen., apple iphone 11 screen replacement, how to replacement iphone 11 back glass cracked, best replacement iphone screen? every type compared – lcd | oled – soft – hard – oem, iphone 11 pro max display replacement, iphone 11 alerts users their screen isn’t genuine after repair, iphone 11 display replacement | iphone 11 lcd screen replace | iphone 11 face id repair ams – hindi, iphone 11 lcd screen replacement, iphone 11 pro max touch glass screen restoration || iphone 11 pro max touch glass replacement, iphone 11 pro max screen replacement (fix your broken display!).

Thank you for visiting Softwarediscover.com and reading this article! If you found this article useful, feel free to share it with your friends and help spread knowledge.